Sunday, May 18, 2008

Changing Your IP Address

Once they shut down your account, you need to do the obvious, like empty out all your cookies, maybe even changing browsers. With IE 7, you can restore to factory defaults, and clear all private data in one shot. The big way they get you is your IP Address. So, you will need to forcibly change your IP Address through your Modem and/or Router.

Direct To Modem


1) Go to the start menu, click on run and type CMD
2) Type in IPCONFIG
3) That is the current IP address (assuming you dont have a routed hooked up)
4) Now you are going to type IPCONFIG/RELEASE
5) You will be disconnected from the internet --- Go to Start menu, My Network Places, Click on Network Connections in the left menu, Right click on your internet connection (It may be Local Area Connection, something to that affect)...anyways, right click and select properties
6) Now select Internet Protocal (TCP/IP) and select properties
7) Choose Use the following IP address and type in the following:
IP ADDRESS: 192.168.11.100
Then just click on the Subnet Mask and it will fill it in
8) Next Click OK to close that window and then OK on the other window
9) It will take a couple seconds and then once you are able to, click back on properties for the Internet Protocal (TCP/IP) and select Obtain An IP Address Automatically
10) Click OK and OK to close those windows and now go back to the CMD prompt and type in ipconfig/all
11) As you will see, the IP has changed!!!
12) Now this is the COOL part, you can copy that information (you will need IP Address, Subnet Mask, Default Gateway, and the DNS Servers) and mark it down for one of your eBay accounts.....When you want to go back to that IP, you just go back to the properties section of the Internet Protocal (TCP/IP) and type in all of that information that you wrote down...BOOM....you are at that IP again (dont believe me, then go to Find My IP Address - Lookup)
13)You can easliy switch between IPs this way and you dont even have to unplug the modem.

Through a Router


What you need to do is change the MAC ID for the ROUTER ONLY. The reason why people still get the same IP is because of this. The original MAC ID is located on the bottom of the router so there is no need to copy or write it down if you ever want to revert back to it later.

The first step is to connect your Ethernet cable from your computer to the router so they can communicate and adjust settings. You do not need to do anything with the cable modem at this time. It will be towards the end.

Open up IE (internet explorer) or Firefox and type in your router address, mine is 192.168.0.1 if you don't know it then look in your router manual or cd that came with your router. Or goto the Run command and type in "cmd" and the ipconfig/all and you will see you router address.

Enter your login name/password if you have it set, mine is "admin" which is default. Now the menus is different for each router company. Just find the option that says MAC ADDRESS and click on it or click on manual settings and you should see your MAC ADDRESS. It looks like 6 boxes with 12 numbers and letters in sets. For example 01-5d-b2-42-f1-65

Now you want to change the MAC ADDRESS by doing the following.
Leave the first box the same. You only have to change the other boxes with numbers from 0-9 and letters from a-f but keeping the letters and numbers in the same position and only changing the value for example 01-4b-c5-31-a3-45

After you have replace them click on save settings or apply settings.
You will lose internet connection at this time. Now the final step is to unplug your router and your cable modem for about a minute or so and plug it back in. give it couple minutes to initialize and check your ip at ipchicken.com

You now have a new IP address. Repeat the process to get a new IP address through your router.

No comments:

Web Statistics Online Marketing